Archive for February, 2012
Shower Drain
As drains age, they begin leaking. Often, the piles loosen, the putty dries up or the tape begins to lose its effectiveness, causing water to trickle down the drain. If you have a sink drain that leaks, you can mend it by following the steps outlined here. And by attending to it yourself, you’ll be saving by not calling in a plumber!
First, close the tap before starting work. Next, remove all the fittings of the drain by unscrewing them, using a screwdriver. Next, take off the tailpiece. Ask a friend or family member to hold the drain pipe from over the sink while you loosen it with pliers.
If your drain has a plastic retainer, unscrew it before the drain pipe comes loose. Now that you have disassembled everything, clean it thoroughly. Check that you have cleaned the previous plumber’s putty from the fittings of the drain. If something is left over, it will weaken the bond when you put it back altogether and begin to leak once more.
Now, coat the part under the rim of the drain pipe with 0.5” thickness of plumbers’ putty to prevent future leakages. Remove any excess putty from the pipe or you will find it very difficult to clean it once it dries. Now, replace the drain pipe into the drain and screw all the fittings to the pipe below the sink. This simple operation will repair your leaky drain.
However, if you have a leaky shower drain, water may collect around the edges and make its way to the ceiling below it. To repair this, cut a panel in your ceiling downstairs. However, if you live in a rented accommodation, speak to your landlord and have him repair it or get his approval before doing it yourself.
Now, place some cloth on the floor just where you want to get down to work. Wear a pair of goggles. Then, make a cut of about 1.5 feet square into your ceiling that’s just below your shower drain, using a saw. Remove the locking unit using pliers and then the gasket.
Now, in the bathroom, loosen and take off the packing nut from the leaky drain. Remove the drain collar and clean the area around it with a putty knife, and clean the shower drain entirely.
Next, take about an inch of plumber’s putty and coat the base of the drain collar with it. Replace the drain collar using a very firm hand or some of the putty you just applied will come off. This is normal, so don’t panic. Once this is done, screw the locking nut tightly again and then take off any extra putty from around here and replace the packaging nut where it belongs. Use silicone caulk to keep this packing nut firmly in place.
To test if the leak is plugged, open the tap and let a little cold water trickle out. Now, if there is no leakage, you will need to repair the drywall. If a leak persists, call a plumber.
Photo Credits: lavenderstreak
Originally posted 2010-04-20 17:59:08.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 29, 2012 in
Drains, Handyman, How to Fix, Plumber, Shower
The best kind of fix: prevention!
Many of home furniture problems can be solved before they happen, with a little something known as "prevention." The home improvement industry places a lot of emphasis on fixing things, but when you know how to prevent something from breaking down, you are essentially "fixing it before it breaks." In this article, we'll explore some popular ways you can keep your furniture protected and out of harm's way. After all, a well-maintained piece of furniture can often be better than a formerly broken one.
Understanding Moisture
Moisture is frequently a problem with furniture - whether you're talking about wicker chairs and tables, leather, or plain old wood, too much moisture can definitely wreak a lot of havoc. Even in very humid environments where there's condensation, wood furniture can be exposed to the possibility of swelling. So how do you prevent this?
Some pieces of furniture can stand to avoid total dryness, too. Remember that some moisture in the air might be good for your furniture, even if too much can cause it to warp. You don't want to micromanage your furniture based on the humidity level each day, but try to keep in mind that if it's too humid or if it's raining outdoors, you should probably move the outdoor furniture inside.
Understanding Sunlight
Now that we've addressed the problems rain can pose to your furniture, it's important to remember that sunshine can also cause problems. At least, too much sunshine. You wouldn't leave yourself out in the sun for an extended period of time without some shade or protection - you'd get a sunburn. Although wood isn't comparable to a human being, it's important to remember that sunlight over time can dry out and damage wood.
Sunshine is easy to protect against - dragging a tarp or large cloth over your furniture on a scorching hot summer day wouldn't be a bad idea. Even keeping your wood in the shade, such as on a porch, can protect against the sun.
Wood and Furniture Maintenance
It's important to regularly dust and clean your furniture, whether you have wicker, leather, wood, or a combination. Keeping your wood free of too much moisture and debris will help keep it clear and strong. To get a lot of life out of your wood, try not to expose it to too much water or sunshine.
Photo Credits: `Nicolas - designer
Originally posted 2009-08-21 03:58:38.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 28, 2012 in
Furniture, Handyman, How to Fix
There's the chip.
If you've been driving behind a truck carrying stones, looking for a way to drive through traffic and get out of harm's way, you're definitely irritated when one of the rocks slips out and comes down on your windshield, chipping it slightly. Even if you know a lot about cars, this inconvenience seems like a waste of time and money to get fixed, especially since it feels like it never should have happened. But thinking about the problem won't fix the chip. Here's how a chip in your windshield can be fixed.
First, remember that fixing chips in your windshield is usually best left to professionals. Unless you've fixed chips before, this article will only serve as a demonstration of how chips are fixed by technicians who know how to work with glass. Even though glass is all around us in our daily lives, it is still a highly fragile and brittle material that can easily form into sharp edges that can do a lot of damage to someone who's not being cautious.
Glass professionals will be able to drill into your glass windshield and apply some sort of vacuum pressure to prepare the area. The professional will then inject resin into the windshield, which will work to fill the affected area as if the glass was always there. Once this has been injected, it is cured by ultraviolet light and then scraped smooth.
This is ideally what happens, but not always how it goes down. A chip present in a windshield means that there's a strong possibility the glass can crack, causing further damage to the windshield and making a total replacement necessary. That's why your chip repair costs can be higher than you expected - not because anyone is ripping you off, but because of the fragile nature of glass. If you could work with glass, you would probably understand the complications that often arise in glass repair. It's often best to simply replace glass instead of repairing it.
Now that you know a little more about the chip in your windshield, you should try to strive for better prevention. Stay clear of debris-stirring or carrying trucks that might drop a stone on your windshield. If you're careful about how you drive, you should be able to avoid a chip in your windshield.
Once you do notice a chip in your windshield, be sure to have it taken care of as quickly as you can. Be sure to ask professionals for advice about what to do before you take the car in for treatment.
Photo Credits: Lee Bennett
Originally posted 2009-08-03 03:51:22.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 27, 2012 in
Car, How to Fix, Mechanic
Fixing old doors.
With winter rolling around and tough economic times, the name of the game for many people across the northern hemisphere is this: how to save money on heating in your home without investing in a new heater or breaking their back to improve their home. One of the best ways you can fix the problem is by attacking the key areas where your home is losing heat - and one of these areas is simple: your door.
Many doors today already come with weather-stripping that traps in air automatically with every time they're shut. But that's no guarantee your door has the same. Here's a quick guide to setting up weather stripping on your door.
One of the first things to do is consider the material you want to use: weather stripping is seen in rubber, foam, metal, and plastic. Go to a local hardware store and find the appropriate materials - but not without measuring your door fir so that you understand exactly how much weather stripping you'll be needing.
You can attach the stripping to the door as directed at your local hardware store - it's not a bad idea to ask for help if you're stuck here, especially when it comes to all of the different varieties of weather stripping available. Once you are ready to attach the stripping, go ahead and do it, being as thorough as possible and working to make sure everything stays symmetrical and relatively tight.
Once you've attached the weather stripping - and before you move on to the next door - test to see how well you've done. Some people do this by lighting a stick of incense near the door to see if there are any areas that are leaking air. Light the incense and go to the other side of the door - once there, if you see incense floating out, you need further stripping. Make sure you note where the incense is getting through so that you can fix the appropriate location on the door when you come back around.
After you have a handle on your weather-stripping abilities, go ahead and install weather stripping on all of the doors in your home that needs stripping. Now, you're all set! You can enjoy a more thoroughly-insulated home this winter; this means a tighter energy bill and a more peaceful state of mind. One more tip: keep the money you save on energy to invest in more home improvements!
Photo Credits: boboroshi
Originally posted 2009-12-24 03:39:54.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 26, 2012 in
doors, Handyman, How to Fix
Five Ideas for Remodeling Your Kitchen
Whenever a spouse brings up the possibility of fixing up the kitchen, it's usually the other spouse's job to think about the money (hint: I'm on the money thinking side). After all, remodeling anything your home probably won't be a cheap situation, especially the more ambitious your plans are. But if you really want to fix a kitchen and make some necessary repairs while upgrading a room's look, there may be no avoiding it.
Don't forget that fixing a kitchen can increase the value of your home if you plan on moving to a larger home in the near future. That's just one of the reasons you'll want to remodel your kitchen, but if your heart's already set on it and you're not sure you have the cash, don't fret. This article will tell you five ways that you can remodel your kitchen while slashing the prices.
- Change the wallpaper or paint the walls.
Perhaps one of the quickest and cheapest ways to change the overall look of your kitchen is to look past the cabinets, countertops, and appliances, and to the wall itself: is the wallpaper dragging the rest of the room down? Does the color contrast in all the wrong ways with its environment? It might be time to either try new wallpaper or give it a new paint job. Make sure you consult with someone to be sure you're picking a color that will improve it, not do further damage to the ambiance.
- Update your countertops.
Countertops take up a lot of the space in the kitchen, and making sure that they're top-of-the-line can be a great bonus for kitchen lovers. Expensive stone countertops can make the entire kitchen seem more expensive without breaking the bank.
- Modernize your appliances.
If your kitchen is clean and looks good, maybe it's time to modernize the appliances you're actually using. Even if you plan on showing your house to prospective buyers who won't be taking your appliances, the better your kitchen looks, the more perceived value your home will have. Besides, since you get to keep the appliances and use them, it works better for you.
- Redo the cabinets.
Perhaps the first place most people look in the kitchen is to the cabinets: old dusty wood can be replaced by new, strong timber. It's not an easy project but if you tackle it yourself, you may be able to save a few bucks.
- The floors!
Although the floors will be under your feet 100% of the time, they can still have a dramatic impact on how the rest of the room looks. If you can't figure out anything else to do with your kitchen, maybe you should stop looking around and simply look down at your feet.
Photo Credits: brianc
Originally posted 2009-07-16 03:30:16.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 25, 2012 in
Handyman, How to Fix, kitchen
How to Organize Your Basement
If one of the things that seems to be holding your home back is the amount of clutter in every room - especially the basement - then it might not seem like an easy remedy at first. This might especially be true of older people who have gained a lot of both "junk" and "treasures" over the years: it gets harder and harder to discern which is which. But if you've decided that it's finally time to organize the clutter in your home and finally clean out that old basement, then you've stumbled to the right article. Here, you're going to learn exactly how to organize your basement in the best way possible.
First, be willing to part with a majority of your things. A majority? A majority?! How can I ask that? I don't even know what you own. What I do know, however, is that most people in this day and age keep much more "stuff" than they actually need. Most of the junk in your basement is junk simply because you don't use it. It falls into one of two categories: junk that you don't use anymore, or something you want to keep for sentimentality's sake. The latter is yours to keep, but when it comes to the junk you never use, it's time to clear the clutter by gutting the clutter.
Be relentless when it comes to this kind of clutter. If it serve no purpose, or you don't think that you'll use it, throw it out. You might find yourself taking a trip down memory lane, but there are more important things in your life than keeping an old pencil that you had in law school. Your memories will last - everything else that you don't use anymore can easily be bought again should you ever have the need to use it. When in doubt, chuck it. You'll be glad you did.
Second, be willing to let things get worse before they get better. Part of the organization process might actually include dirtying things up a little more - this allows you to sort through materials that you no longer use and the materials that you do use. If you find yourself making the basement dirtier, that's a good sign. If you're too trepidacious to try this, it's time to get even dirtier. Remember, to organize your basement effectively, you need to gut it. So gut it, and let the clutter spill all over the place while you re-organize. It will help you focus on your task and you'll be better off in the long run.
Photo Credits: blakespot
Originally posted 2009-08-04 03:30:25.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 24, 2012 in
Handyman, How to Fix
Got deer?
Many people love deer, but deer can get into gardens and eat the flowers, which means that not everyone will always want to invite them in. If you have a lawn including a garden that's been attracting unwanted deer, there are some ways to keep them out. Here are a few of them.
Build a fence. If you've been thinking about building a fence anyway, but needed something to fence out, you may be able to kill two birds with one stone here. Building a fence to keep out deer doesn't necessarily have to be expensive, but you will want to make sure to keep your whole lawn covered from deer if you want it to be totally effective. Chances are you'd be building this fence in a heavily-wooded area, so be sure to browse around for the best kinds of fences for these terrains.
Warn the deer first. You don't need to stand in a hunting tower rifle in hand in order to scare deer away. You actually should have a few options. If deer are plentiful during a particular season of the year for you, you can apply predator urine to trees around your area in order to scare deer off - this has to be applied on a fairly regular basis, so if you're out gardening frequently, you can make this a part of your routine. If handling urine isn't your style, you can also think about motion-activated noisemakers that can startle deer away.
Make your garden undesirable. If you don't want to attract deer, maybe you shouldn't grow such deer-attracting plantlife! Deer love some items that can be found in gardens, and if enough deer are getting into your garden that it ruins much of the plantlife, you can try some of the above-mentioned tactics or simply start growing plants that deer don't like. If this seems like too much to you, you could also try keeping a border around your garden that will keep deer out.
A border could include a natural border through plants, an actual fence that you post up, and/or placing the deer-unfriendly plants on the outside of your garden.
You don't necessarily have to remake your entire garden or lawn to keep deer away. You simply need to understand how deer can be deterred and give them one powerful reason for them to keep moving along.
Photo Credits: Lee Coursey
Originally posted 2009-12-03 03:35:56.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 23, 2012 in
Backyard, How to Fix, Landscaper, Lawn
Leaky Toilet Flange? No problem!
When we see some sort of liquid forming around the bottom of our toilet, we tend to get a little peeved. After all, with all of the liquids that form the usual daily traffic around a toilet flange, this means that a broken toilet might mean some dirty repairs. If you're curious about how to fix a leaking toilet flange so that you won't have to worry about it again - and so that you can stay dry the rest of the day - you've come to the right place.
First, you'll have to diagnose that the problem is with the flange itself and not with some other spot on the toilet. Sometimes, your toilet might not even be broken - a son or daughter might have gotten bathwater in the wrong spot. But if the toilet is rocking more than it should, you'll probably want to take a look at the flange underneath, which means pulling your toilet out of its place.
Once you look at the flange leading into the plumbing underneath, you should have a better idea of what's going on with your toilet. You can usually see if your flange is broken because there aren't many parts that go into its connection with the toilet: check that connection and see if anything has snapped or has become loose.
In order to repair the leaking flange, you'll actually want to replace as much of it as you can - you can buy a new toilet flange at a hardware store, or even purchase a "spanner flange" that only partially reinforces your flange in case you don't want to repair the entire object. Unscrew the part of the toilet flange you want to lift up - you can use a power drill if need be - and then remove the toilet bolt. (Note: if the toilet bolt is the problem, be sure to replace this, as well.) Place the toilet bolt under the spanner flange and drill the flange into the rest of the hardware.
Be sure to customize your repairs to your own needs - if you have more problems with your toilet flange, simply replace the entire unit and buy new toilet bolts. You can drill new holes to make sure that your screws fit into place, and voila! You should be able to re-attach your toilet to the flange and the toilet should be steady and leak-free. Now you can enjoy many more days of dry toilet usage.
Photo Credits: Omega Man
Originally posted 2009-08-04 06:00:32.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 22, 2012 in
Bathroom, Handyman, How to Fix, toilet
Do you feel a draft?
One of the tools with the most uses around the house is simple: duct tape. A few rolls of duct tape in your tool shed will help you construct a temporary fix around most things, and will help to make sure that more brittle objects like glass can be rounded off so that they pose less of a safety threat. When it comes to the minor inconveniences, duct tape can deliver there, too. That's why you can repair a torn shower curtain with duct tape. Still curious as to how it's done? Let's explore.
If you tear a shower curtain down, it can puncture each hole that is meant for each of the shower rings - this leads to a "torn piece of paper from a notebook effect" that most people think means they have to go showerless. But in the time between a trip to the local home improvement store, you'll have to get by with a shower or two, especially if you have family in your home. Won't taping each individual hole require too much time and effort?
As it turns out, not if you're creative with your rolls of duct tape. Instead of taping up each hole, simply create a side of duct tape where all of the shower ring holes used to be - this double-sided duct tape edge should have as little adhesive showing as possible. This isn't totally necessary, of course, but it helps make things easier and more comfortable.
Now that you have a side of your shower curtain taped over with duct tape - the side with all of the ring holes - you'll need a way to put that side back up on the shower rings. You can do this by punching your own holes in the curtain and duct tape, essentially creating a new side of the shower curtain for temporary use. Hole punches can work if your rings are small, but you might need some larger holes if your rings are large and plastic. To do this, simply punch a hole and then poke it through with a wooden dowel or a similar object that will expand the hole.
Once you've done this a few times, you should be ready to put your repaired shower curtain up. It won't look like the best shower curtain you've ever used, but it will help ensure that you can close off your shower before buying a new curtain. If you're worried about splashing water out of the shower tub, you won't have to worry anymore; you'll be all set. Just another day in the life of a roll of duct tape.
Photo Credits: massdistraction
Originally posted 2009-08-14 03:48:27.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 21, 2012 in
Bathroom, Handyman, How to Fix, Shower
First figure out what type of faucet you're working with.
One of the most common household repairs is the faucet-fix; it wouldn't be such a common repair if these devices worked all of the time! The bad news is you don't always feel like you have time to fix a faucet right away. That's why this article will help explain how to fix a faucet in a jiffy, even if you have a specific type of faucet that you aren't sure how to manage.
First, let's explore the faucet types.
The Ball Faucet: The ball faucet is your classic single-handle faucet on top of a large round base, allowing for a certain mix of hot and cold water with just one nozzle. Many homes today have ball faucets, but you might also want to be aware if your single-handle faucet is actually a disk faucet, a recent innovation.
The Disk Faucet: This faucet is also single-handled. The Disk faucet essentially works by operating with disks instead of a ball. These will also have a round base, so you won't always be able to discern a disk faucet from a ball faucet simply by looking at it. Be sure to find out what kind of faucet you're using before you try and fix it.
The Compression Faucet: Double-handled, the compression faucet works with two valves in each handle allowing for the basic blocking and allowing of flows.
The Cartridge Faucet: These can be a little tricky to discern as they can be single or double-handled. These operate using cartridges, and you might be able to recognize these by the motion they use: a double-handled cartridge faucet should require the faucet to be moved up and down for flow and twisting the knobs for temperature.
So how do you fix these individual faucets in a jiffy? You'll need to know the basics. The first rule with any of these faucets is to turn off the water supply leading to the faucet - either find a valve under the sink or turn off your house's water supply temporarily.
After you've turned off the water, turn the faucet on to let the rest of the remaining water flow out. To prevent dropping anything into the drain, try putting a towel over it. Begin to take apart the faucet and look for the problem - if you need to replace parts, bring that part with you to the hardware store so you can search for duplicates.
Find a guide or blueprint for how your faucet should look on the inside, and try to identify the problem. Online guides that show you how to fix each individual faucet can also help.
Photo Credits: Joe Shlabotnik
Originally posted 2009-09-10 03:41:27.
This post involves:
... and focuses on:
Posted by Fix Handyman on February 20, 2012 in
faucet, How to Fix, Plumber, Sink
Stumble
Reddit
Digg
Del.icio.us
