Archive for the ‘appliances’ Category
Is your dishwasher acting up?
The dishwasher is one of the modern conveniences that we often take for granted - until it starts failing us and we realize how much easier it made our daily lives. If you have an annoying dishwasher, it's best not to put off the problem for the future. Instead, you can nip it in the bud by seeing if you can diagnose the problem and using some good old fashioned elbow grease. Here's how to fix an annoying dishwasher.
First it helps to understand how a dishwasher basically works. A dishwasher has a lot of water flowing in and out of it on a daily basis - first, it uses a heated water and detergent mix in order to complete a wash. This dirty water is then drained from the dishwasher. The dishes are then rinsed with water and a rinsing agent, and then this water is drained and the dishes are left to dry, often with heat added to the drying process. When you open up your dishwasher door again, you have a clean set of dishwasher and silverware waiting to be put away.
At least that's how it's supposed to work. If your dishwasher is having problems, empty it and take a look at some of the basic parts. For example, there is a water inlet valve which lets water in, a float that helps the dishwasher know when the water is high enough, and a motor which pushes water into a pump that sprays the dishes clean. If any of these parts look like they need to be replaced, replace them.
It helps to keep your dishwasher clean on a regular basis - dishwashers do have a lot of clean water going through them on a daily basis, but that doesn't mean the dishwasher itself will be clean; only your dishes. Make sure your dishwasher is clean and try another load to see if it cleared out whatever might have been causing the problem.
If you're still having trouble with your dishwasher, consult an owner's manual (it's best to keep your owners' manuals in the same secure spot) and see if there's anything you can do. Replace what needs to be replaced. If you're stuck, call in a repairman and see if they know what the problem is - as you do, be sure to have them explain the problem to you in case it ever comes up again. Chances are that you'll learn something about your dishwasher that just may come in handy in the future.
Photo Credits: zenobia_joy
Originally posted 2009-12-15 03:10:54.
This post involves:
... and focuses on:
Posted by Fix Handyman on January 27, 2012 in
appliances, Handyman, How to Fix, kitchen
Water damage.
Let's face it - with all of the economic and financial issues troubling us these days, the last thing most people need is another expense that will add more frown wrinkles to your face. So when you realize that you're paying way too much for your water usage, are you prepared to actually go ahead and fix it, or do you simply sigh and try to find the extra money for this month?
Sigh no more. Let's take a look at some ways you can fix those high water costs and bring them back down where they belong.
First, let's start with a simple trick. Your toilet fills with water during every flush, including in the toilet tank. But once your water gets up to a certain level, it stops. If you want to displace some of this water volume, fill up a water bottle and place it in the toilet tank. Since this displaces water, you'll start saving water after each and every flush. Just make sure that you know how a toilet works, or else you might end up doing more harm than you originally intended. (By the way, if you have a toilet flushing more than 1.6 gallons per flush, it's time for a new toilet).
Next, remember that a lot of the water you use in your house goes through your washing machine. You may think that you drink a lot of water, but it's nothing compared to the amount of water you might be using for clothes. You can cut down on this water by simply doing less loads of laundry. Don't be wasteful with this water, so only wash clothes that actually need to be washed - make sure that you wear some clean clothes more than once and that you don't end up washing too many clean clothes. This will cut down on the amount of loads of laundry you have to perform every week.
Also, be sure to monitor the water that you waste. If you keep a bucket of "greywater" around, you can dump the water you didn't drink from a glass in there and use it to water plants.
There's plenty more to learn about fixing your problem with high water costs. The most important thing is to look at your individual situation, find out where much of your water usage comes from, and work to optimize your own water expenses.
Photo Credits: thirteenthbat
Originally posted 2009-10-21 03:03:42.
This post involves:
... and focuses on:
Posted by Fix Handyman on January 26, 2012 in
appliances, Handyman, How to Fix, toilet, water
Frosted Fridge?
We all love refrigerators because they keep our food cool and fresh, but when we want our food cold, we put it in the freezer, not the "fridge." So what happens when your refrigerator is running too cold? Instead of freezing all of your food and drinks, you can try a couple of simple steps to fix the temperature.
When a refrigerator is running cold, it means that the temperature settings or control are out of whack: much of the work you do to fix your refrigerator will include "diagnosis" work in which you try to figure out the source of the problem.
The Refrigerator Temperature Setting
The first thing to do is check the refrigerator temperature setting itself - is it set to cold? You may not have a problem with a refrigerator; instead, you may have a prankster on your hands. You can adjust the refrigerator temperature setting simply by adjusting the setting manually. You'll want your refrigerator to run at about thirty-eight degrees Fahrenheit.
You can confirm the temperature of the refrigerator by placing a simple cooking thermometer in there and letting it sit for a good amount of time - give it a couple of hours just to be sure. If your refrigerator temperature setting does not seem to be the problem, it's time to test the temperature control itself. This will entail some more involved electrical work, so if you're not up to the task, simply be ready to call a repairman. They'll be able to help you, and be sure to tell them whether or not the refrigerator is powered.
Testing the Temperature Control
Note: Before you begin testing the temperature control, be sure that you unplug the refrigerator, disconnecting it from any power source. This will help you avoid electric shock.
In many refrigerator/freezers, the cooling system for the freezer is simply a vent that regularly lets in cool air from the freezer. To get started testing the temperatur control, remove the temperature setting controls, often by unscrewing them.
Once you've made it that far, you'll be able to find that the control within is connected to two wires - make a written note to remember where the wires are originally. For the next steps, consult these instructions which give you pictures explaining in greater detail.
If your refrigerator is still having problems, try and check with a professional and think about buying replacement parts - or even a replacement refrigerator.
Photo Credits: tranchis
Originally posted 2009-11-19 03:19:56.
This post involves:
... and focuses on:
Posted by Fix Handyman on January 8, 2012 in
appliances, Handyman, How to Fix, kitchen
Noisy dishwasher? No problem, we can fix that!
When you have a noisy dishwasher, you don't exactly feel like doing the dishes. After all, doing the dishes alone isn't the most entertaining bit of home maintenance in the world. The prospect of adding noise to the equation when you're trying to watch the game on TV or hear your favorite television show makes the idea even less appealing. That's why you'll want to fix your noisy dishwasher as soon as you can - so you can get back to quiet evenings after a rough day at work.
Of course, in order to fix your noisy dishwasher, you'll have to know what's causing the noise in the first place. This is where most of the work in fixing the noise itself will take place. First, try to find your dishwasher's owner manual: if it gives any warnings against improper dish loading that you've been violating, the reason for the noisy dishwasher might simply be human error. Oops. Do the dishes right next time and hopefully the noise will subside.
It's not always human error, however. If the problem wasn't you, you'll have to do some dishwasher inspecting. The first place to look? The pump at the bottom of the dishwasher. Make sure that it's not clogged with debris such as stuck silverware, food, or uneaten seeds. This pump should be perfectly clean.
If that's not the problem, you also might want to make sure that your dishwasher is level. If your dishwasher sits on "feet," you should be able to adjust them manually. Use a level to check that it is not leaning forward/backward or to any one particular side.
If none of these fixes has made the noise go away, there's a possibility that your inlet valve is the source of the issues. The inlet valve is not an easy thing to replace, but you'll probably want it replaced if you want to get rid of the noise. If you're out of answers, call in a repairman who will know what makes your dishwasher become so noisy, and ask about the possibility of replacing the inlet valve. This could be the source of your noise, but it's not an easy challenge to take on yourself.
Make sure that you keep your dishwasher clean, regularly cleaning it out of debris and gunk. Even though the dishwasher seems like a self-cleaning machine, you'll want to check how clean it really is from time to time.
Photo Credits: scampion
Originally posted 2009-08-17 03:00:21.
This post involves:
... and focuses on:
Posted by Fix Handyman on December 23, 2011 in
appliances, Handyman, How to Fix, kitchen
Replace that broken fridge handle quickly and easily.
Around the house, the refrigerator is probably one of the appliances we take most for granted. It keeps our food fresh for days, keeps liquids cool, and the freezer can store foods for months. If you have a broken refrigerator handle, you've already experienced what it's like when this appliance doesn't work like it usually does. You probably have one thought: "I need to get this fixed immediately!" Though the handle breaking can be a minor inconvenience, it's something you'll want to taken care of. Here's how to fix it yourself.
Fortunately, repairing a refrigerator handle is an easy thing. Why's that? Because the simplest way to do it is simply to replace the door handle itself. And in order to accomplish this, you'll follow a few, simple steps.
First, you'll want to get rid of the old door handle. Presumably, you've left this handle on. Identify the areas on the handle that are attached to the refrigerator via screws, and then loosen the screws. Make sure to keep those screws in case you need to use them with your new refrigerator handle. Even if you buy the exact model of refrigerator handle from the manufacturer, there's no guarantee that they'll include the right screws you need. Rather than go through the trouble of finding new ones, simply save the old ones! (This is unless, of course, the screws were the problem in the first place).
Next, it's time to install the new handle. Line it up with the matching holes and twist in the top screw - this will allow the refrigerator handle to hang. Don't necessarily tighten this screw right away, as you'll want some flexibility for later. Next, twist in the bottom screw to near tightness with some flexibility. Now, use the flexibility of the new handle's position to align it correctly with the refrigerator. Tighten the top screw and then the bottom one. Voila!
Often times, repairs like this can be as simple as going online and ordering the right parts. Some manufacturers will even replace broken parts for free - some will do this while requiring that you send them the old part. In either case, make sure to explore your options and take care of this right away: don't let your house deteriorate. You never know when a guest might show up unexpectedly and try to open your refrigerator.
Photo Credits: Avoir Chaud
Originally posted 2009-08-10 03:13:33.
This post involves:
... and focuses on:
Posted by Fix Handyman on December 22, 2011 in
appliances, Handyman, How to Fix, kitchen
Check the water level.
Sometimes, it's more frustrating to see a machine that's partially working rather than one that is totally broken. This is especially true of the novice do-it-yourselfer, who knows that they're close to having the solution but isn't quite sure what to do next. If you're having this kind of problem with your washing machine tub, which won't fill up with enough water for your laundry, your troubles will be over in just a few minutes.
To understand exactly why a washing machine tub might not fill with a proper amount of water, it will help to know how machines "know" when they have enough water in the first place. Devices like dishwashers have level detectors that let the machine know that there's a sufficient amount of water in the machine. The washing machine has a water level switch, as well.
Note: Before you start working on this problem, be sure that your washing machine is disconnected from your electrical power. For all of your plugged-in appliances, it's best to avoid these kinds of problems simply by unplugging them before you begin.
The way a water level switch often works in a washing machine is relatively simple: the more water there is in the machine, the more the air pressure builds up. The water level detector keeps tabs on this air pressure and knows when the water is built up to a sufficient height. When your machine isn't filling with enough water, a problem with the water level switch can often be the culprit.
In order to make sure that your water level switch is working effectively, you'll want to test it (of course, the power to your washing machine should be disconnected!). Here's a good guide to testing your water level switch that will help you understand how the switch works and how to test it.
If you are still having problems with your switch, there's a possibility you might need to call in a repairman or have the part simply replaced. If you believe it needs to be replaced, it might be a good idea to contact the manufacturer and find out the part that you'll need.
After you've made the adjustments and hopefully fixed your washing machine, plug it back in and try it out. How is the water level now? If you're still having problems, you'll have to check other parts of your machine. Again: disconnect before tinkering!
Photo Credits: jim212jim
Originally posted 2009-12-10 03:05:42.
This post involves:
... and focuses on:
Posted by Fix Handyman on December 17, 2011 in
appliances, Handyman, How to Fix, Laundry Room
Crusty Ice Maker
An ice maker can be a great convenience around the homes, but they're not a necessity. For that reason, when an ice maker breaks down, it's tempting to put off its repair for a while, simply choosing to live without the convenience of ice-on-command. But what if you did know how to fix some common ice maker problems, or at least knew what the problems might be caused by? You might be a little more inspired to get the thing up and running again - hopefully in a flash.
If your ice maker is making too much ice, you're probably looking at a problem with the shutoff arm - test the shutoff switch to make sure that it's working properly.
If there's ice but it won't come out, you might be looking at an ejector gear problem. ice makers have "ejector gear" in them that helps the ice come out when you place a cup underneath it to capture the ice. In this gear, you'll find an ejector motor - be sure to check that and be sure that it's working. Other problems can include the thermostat and the ice mold heater.
If your ice maker is making no ice, there are a lot of problems you might be having. You'll want to check the shutoff gear, including the shutoff arm and checking the shutoff switch. You'll also want to check the water supply line so that you're sure that water is actually pumping into the ice maker. The temperature is something that contributes, of course, to having ice or not having ice, so be sure that the temperature in the ice maker is correct. You can check the thermostat as well. Be sure to check the water inlet valve as well. You can find an excellent resource for fixing these problems here.
If your ice tastes bad, be sure to check the basic supply lines like the water inlet valve. You'll also want to wash out the ice maker as well as the surrounding area. If you're still having problems, check the places in your refrigerator that your ice water might travel through. If only your ice cubes taste bad - and not your regular water supply - there is probably something along those water lines.
If water is leaking, check the water inlet switch and water inlet valve, as well as the refrigerator's level - consult this guide for a little more information on that. You'll also want to make sure the supply line is running adequately as well as the fill cup alignment (click here).
Photo Credits: Wyscan
Originally posted 2009-12-22 03:25:11.
This post involves:
... and focuses on:
Posted by Fix Handyman on December 3, 2011 in
appliances, Handyman, How to Fix, kitchen
Oven repairs.
When your oven's broken, you know it right away. A broken oven isn't something that can wait for the winter - when you need something cooked, you need it cooked for tonight's dinner! That means that your repairs can't wait, and neither should you: that's why this article will give you a quick summary on how to repair a broken oven and how to address some of the most frequent problems that arise.
The first thing to consider is the oven type itself. Most ovens will either be an oven run by gas or by electricity. If you've cooked before, you should probably have an idea of which one it is, but if you're new to the place and haven't had the time to investigate, now is the time to double-check. Do you have an electric oven or a gas oven?
Once you know the type of oven you have, it's important to understand the type of problems these different types frequently face. For example, a gas oven will usually have problems that effect the ignition of the gas or the supply of the gas. IMPORTANT NOTE: With gas stoves, make sure there are no leaks. If you're not sure, you'll want to call in a professional.
The other most frequent oven type, the electric oven, has its own typical problems. When it comes to these electric appliances, you'll usually encounter your problem with the heating devices located within the oven itself. If you really want to find out what's wrong with your electric oven, be sure to be careful that you don't touch anything that is charged. It's best to be extra cautious when working with either a gas or an electric oven.
Once you've made sure that the gas and electricity to your oven are turned off, you'll be able to finally make some repairs. The first thing to do to fix your broken oven is actually to take the oven apart. If you've never worked with an oven before, you'll want to keep detailed notes about how you took the oven apart so that you can put it back together again.
Huh? Take the oven apart? You heard me right. As you take the oven apart, you should be able to find the problem, if you haven't already. Taking the oven apart will help you to identify the problem, and either fix it or identify the need for a replacement. In doing so, you'll also learn about how your oven works for future reference.
Photo Credits: SuperFantastic
Originally posted 2009-10-12 03:08:07.
This post involves:
... and focuses on:
Posted by Fix Handyman on November 26, 2011 in
appliances, home repair, kitchen
Defrost needed!
Defrosting your Freezer
No one likes this job. There is no use in leaving sticky notes on the refrigerator, or complaining loudly when you open the freezer door. Not even threatening to video the mess inside the freezer and posting the family’s frozen shame on the Internet will get anyone moving. The only choice is to call everyone into the kitchen and tell them the time will be now. The freezer will be defrosted and the cleaning begins right now.
The preparation
You will need some very clean towels. If you decide to use regular paper towels then be prepared for them to leave a residue behind when you clean. Paper breaks down very quickly, and you can typically find yourself doubling the cleaning time having to scrub away bits and piece of paper towels. Should you really want to use paper visit a hardware or handyman store and pick up the heavy duty workmen type.
Baking soda is the cleaning agent recommended the most. You don’t want to use strong chemical cleaners in a place where you will be storing food no matter how cold the storage will be. If you don’t think this will be enough to handle the situation in your own freezer than look for products that are labeled as safe around food. Organic products will be best in this situation.
Defrosting
Most refrigerators have a defrost setting for their freezer units. Larger freezers almost always have them, but if you can’t find the setting on yours then turn the setting to 0. Since the fridge and freezer is one unit then you will need to defrost both sections at the same time.
Here is where the rest of the family comes in as you will need to remove the food and either place it in a bag, box, or on countertops if available. If there is ice cream involved everyone can grab a spoon and relax until the ice in the freezer starts breaking up. When you are working against a deadline you might try putting a pan of hot water in the freezer to speed things up a bit. You will need to put another pan underneath the freezer to catch the water as the ice melts. It is better to let the ice melt without attempting to chip it out. You can scratch the surface of the freezer's interior and since you can’t see what is under the ice you cause damage to the unit. You can also hurt your hand because the cold will numb your fingers while you are holding whatever implements you’re using.
Once the ice slush and water have been cleaned out then use either the baking soda or the other cleaning agent you have chosen and clean all parts of the unit. Sticky messes might be scrubbed at with the same type of brush you would use on dishes.
Make sure that both the freezer and refrigerator are dry before you turning the unit back on. Wait until the entire unit is cooling before replacing the food as otherwise it will take longer to return to the normal cooling temperature.
Photo Credits: katesheets
Originally posted 2010-05-09 03:42:23.
This post involves:
... and focuses on:
Posted by Fix Handyman on November 12, 2011 in
appliances, Handyman, How to Fix, kitchen
Save money fix it yourself.
For anyone who's ever seen a dish washer or washing machine break down, the struggle of man vs. technology can seem like a mighty one. This is particularly true if you don't have a lot of experience in working with appliances or other around-the-home machinery. In those cases, you're often at the mercy of the contractor's schedule. If waiting for a repairman to "get around to it" isn't in the cards for you, you'll want to fix your own appliances. There's good news: doing so will help you save money. But you need to figure it out first.
First, make sure you keep all of your owner's manuals in one safe place, usually in a storage box somewhere in your basement or attic. If you don't have an owner's manual for the appliance that broke down, you can still try to find one online, or see if there's a phone number printed on the side of an appliance that might be able to help. The owner's manual is there for a reason: the problem isn't that it doesn't help, but that many people forget to use it.
You can also conduct an online search to do your own research into the appliance. There are some Web sites out there that will be able to show a diagram of the appliance you're working with, and even tell you where you might find some replacement parts.
Fixing a machine usually requires two steps: diagnosis and repair/replacement. The hard part is diagnosis: if you don't understand the inner workings of a machine, you probably won't be able to figure out why your washing machine won't drain or why your dish washer has gone haywire. That's why owner's manuals can come in handy, offering blueprint-like guides to the inner workings of each appliance.
Once you've diagnosed a problem, you have to see if it's fixable or not. If you can snap something back into alignment or flip a switch that shouldn't have been unflipped, repairs will be relatively easy. But if parts have worn down beyond repair, you'll have to order a new replacement part. Don't fret; this is something that the repairman would have had to have done anyway. Figure out the name of the part and call some hardware stores in your area to figure out if you've found the right one. Then you can simply pick it up, along with anything else you might need to purchase.
Photo Credits: ztephen
Originally posted 2009-08-24 03:42:06.
This post involves:
... and focuses on:
Posted by Fix Handyman on October 9, 2011 in
appliances, Handyman, How to Fix
Stumble
Reddit
Digg
Del.icio.us
