Archive for the ‘Bathroom’ Category
Be innovative!
One of the parts of the shower ensemble that we take for granted is simple: the shower curtain rings! Our daily shower is such an ingrained part of our daily routine that we barely think about the quick second it takes to pull our shower curtain closed, let alone the rings that allow this simple maneuver possible. Of course, if you have broken shower curtain rings, suddenly you become inconveniently aware of their presence - or lack thereof. Here's how to fix your shower curtain rings for the long-term so you can get back to your daily routine.
First, go out to a home furnishing store and buy a new set of curtain rings. You'll be replacing all of the rings - remember that inside the home, uniformity in color and shape will be important when it comes to a "crowd" of parts like shower curtain rings. Your goal here will be to replace ever shower curtain ring, even the ones that are not broken. Once you've replaced them all, you'll feel better knowing you have a fresh set of curtain rings through every hole on your shower curtain.
In order to start fixing them, simply remove them. This might require taking the shower curtain off of the dowel first - don't try to pull it all down using force. After all, most household accidents take place inside the bathroom. Now that you've got the curtain off, pull off your shower curtain rings one by one. (Note: In some cases, you might have to take off the shower curtain rings one by one in order to get the curtain off. Whatever order works better, use it.)
Now you can start applying your shower curtain rings. One of the best ways to do this is to put the ring through the hole in the curtain so that you can attach the rings and curtain all at once when you're ready. Some shower curtain rings might be hard to figure out, but once you've figured out their mechanism - and some are quite simple - you'll be able to replace them all in no time.
Voila! You should now have a shower curtain attached firmly to the dowel in your shower, with a fresh set of rings keeping it attached. You should be able to enjoy this new setup for years. Until, of course, the next bathroom project shows up.
Photo Credits: Darwin Bell
Originally posted 2009-08-24 03:01:57.
This post involves:
... and focuses on:
Posted by Fix Handyman on November 24, 2011 in
Bathroom, Handyman, How to Fix, Shower
Cold showers?
If you're like me, you don't particularly like that first few minutes of taking a shower when the water is running and you're waiting for it to warm up. You'd rather simply jump right in, not waste any water, and get the shower over with so you can move on with your day. If you're sick of wasting water and wasting time - even if it's just a few minutes, a quick fix on your cold shower head can improve the quality of your life. Even if it's just those few minutes each day!
Here are a few tips to fixing that cold shower head and getting your next shower to be warm in an instant.
- Take a shower after you use water elsewhere. If you're really short on ideas but need to take a quick, warm shower, try this: shower in "batches." That is, take a shower right after someone else in the morning. Their usage of the water will ensure that it's warm for you right away, and you'll be able to climb right in without missing a beat. Just make sure that you don't wait at the door until they're finished! (One note: You don't only have to wait until someone else takes a shower. If someone is using hot water from the same water heater your shower uses, keep in mind that it could be a great time to take a shower if you need it.
- Install a tankless water heater. If you want to spend a few bucks so you don't have to wait until someone else has used hot water, but you don't want to break your bank account, either, try and install a tankless water heater. What is a tankless water heater? Quite simply, they are water heaters that work locally to cover some of your bathrooms - in other words, it's a water heater that doesn't heat up your whole house. This can be great for bathrooms if you have a family that needs hot water in the mornings but at different times. It's also less expensive than simply purchasing an entirely new water heater.
Like so many aspects of home improvement, fixing your cold shower head starts by looking at your problem from its cause. You really can enjoy hotter showers if you use a little imagination and get proactive with your home improvement.
Photo Credits: sburke2478
Originally posted 2009-10-06 03:04:02.
This post involves:
... and focuses on:
Posted by Fix Handyman on September 15, 2011 in
Bathroom, home repair, Shower
Bathtub or toilet clogged? Grab a plunger!
Being able to plunge away a bathtub or toilet problem with a plunger is one of the basic home improvement skills everybody should know. It might not always be the most pleasant task, but it's simple, easy to learn, and it often gets the job done. The better you understand how to fix a clogged drain with a plunger, the less you'll need to work. Here's how to most effectively fix your drain using a plunger.
First, what kind of plunger do you have? Most of us imagine the stereotypical bell-shaped plunger, but you might have seen other options at the local hardware store. Use the "stereotypical" one; this bell-shaped plunger should be able to fold back to become flatter when you need to unclog either a sink or a bathtub. There are less-traditional plungers that aren't able to change their size for the type of drain you'll be unclogging; try to avoid these.
Next, it's important to understand that plungers work better if they're encased in water. If your toilet is clogged and there's hardly any water in the bowl, fill a container with water and use it to fill up the toilet bowl about halfway up. Once you have enough water over the drain to essentially cover the end of the plunger, push the plunger over the drain and form a seal around it. Now, pump the plunger over the drain keeping the seal tight, usually using much of your force to push in the plunger. You should notice that the clog appears to be loosening; however, you might not be able to tell until you flush the toilet again.
You can probably try another round of plunging if this doesn't work. If your plunging still seems fruitless, you'll have to move to the next step on the plumbing ladder: using a snake to break up the clog. If you use a snake and continue to have trouble with a clogged drain that seems totally blocked, it will probably be time to call the plumber.
Most of your clogs, however, should break up once you use a plunger. At the very least, you'll be able to loosen up a clog enough to get your toilet working again. When it comes to other clogged drains - such as the bathroom sink or the bathtub drain - you can fold back the plunger and use a similar method of plunging, making sure that there's some water present above the drain.
Photo Credits: julia fredenburg
Originally posted 2009-08-03 13:55:51.
This post involves:
... and focuses on:
Posted by Fix Handyman on August 27, 2011 in
Bathroom, Bathtub, How to Fix, Plumber, toilet
How to Update Your Bathroom
One of the things that says you like to take care of guests in your home is the quality of your bathrooms. Not only do people want privacy and cleanliness, but they appreciate an ambiance and at atmosphere that suggests you've thought of everything around your home. For the do-it-yourselfer, the bathroom also presents some interesting challenges in and of itself.
For one, you have to work with plumbing when you're updating a bathroom. This is in addition to the rest of the work, including cabinets, floors, and walls. But if you follow a detailed plan, follow through with it, and are willing to adapt to obstacles, you might just be able to update your bathroom efficiently. Here are some steps for doing just that.
1. If you don't have experience, don't start with the bathroom. The bathroom is not exactly do-it-yourselfer rookie territory. As has been mentioned, issues like plumbing are combined with electricity and upholstery in order to make a perfect storm of difficulty for the first-time homeowner. If you want a new bathroom, you simply might think about hiring a contractor. At the very least, don't make updating your bathroom your first project. Start with your basement - where you can at least start from scratch - and build up your experience. You'll be glad you did.
2. Seek out some professional advice. One of the most important things you can do when updating a bathroom is not to treat it like it's your own personal pet project. Make it a community effort - listen to your spouse's take on the look of the bathroom and be willing to get some consultation from a contractor, or even outsource some of the work that you can't handle, like the plumbing. Remember that there's no shame in not doing it all yourself - if someone asks how you did it, you can be perfectly honest. Don't get caught up in your own ideas so much that you forget why you're doing this in the first place.
3. Measure twice, cut once. The old adage "measure twice, cut once" also applies to bathrooms: make sure that your preparations are clear and definitive. You'll want to be as thorough as possible. But don't let exhaustive preparations become a reason for you to forget actually following through on your blueprints. Get to work after you've "measured twice," and set a schedule for yourself. If you get behind, at least be willing to work on it a little bit every day so that you can keep your momentum going.
Photo Credits: brooklyn
Originally posted 2009-07-28 08:00:10.
This post involves:
... and focuses on:
Posted by Fix Handyman on August 23, 2011 in
Bathroom, Handyman, How to Fix
Stumble
Reddit
Digg
Del.icio.us
