Bubblebath anyone?
For many people, the bathtub isn't just a way to get clean, it's an oasis away from the stress and worries that come with daily life. Whether you indulge in a luxurious bubble bath every night or just enjoy a good soak now and then, it's important to keep your bathtub clean, neat, and most importantly, functioning. So how can you fix some of the most common bathtub problems? I thought you'd never ask. Here are the answers to some common bathtub questions.
Fixing a Bathtub Faucet Clog
One of the most frequent problems you'll see with a bathtub is that the faucet gets clogged. This isn't like unclogging a toilet - you actually might have to do some plumbing. But before you conjure up images of tool belts and blue jeans, remember that plumbing isn't complicated every time.
In each bathtub faucet there is a screen that helps make sure that any loose debris doesn't get plopped into your bubble bath, allowing you to enjoy clean, pristine water. The problem with this screen is that it can sometimes collect too much debris and actually clog your water from coming through with a full flow.
If you can, remove the faucet head in order to get to the screen. Take out the screen and wash it with warm or hot water, and use that time to clean out the inside of the bathtub faucet. If you have further problems but don't want to explore before you do further damage, call a plumber.
Fixing a Drain Clog
The next and perhaps more unpleasant problem with bathtubs is that sometimes the drains clog. You don't want to bathe today in yesterday's bathwater, so it's important that you get this drain cleared as soon as possible.
Though you'll want to clean the part of the drain you can see first, this rarely solves the problem itself. You'll want to plunge the drain like you would plunge a toilet, trying to remove as much of the blockage as possible. Fill a little water in your tub before you plunge.
If that doesn't work, you'll have to use a plumbing snake to get the clog out. Be patient with a plumbing snake, as oftentimes you'll have to go very deep before you can reach a clog. Once you do, voila! Good as new.
These are two of the most common problems that occur with bathtubs because they get in the way of the flow of our daily lives. The bathtub drain, for example, also effects the way we take showers. Even if you're initially frustrated, stick with your plumbing efforts as long as you're not doing any damage. You'll probably learn something.
Photo Credits: Darrius Thompson
This post involves:
... and focuses on:
Posted by Fix Handyman on August 18, 2009 in
Bathroom, Bathtub, Handyman, How to Fix
Bathtub or toilet clogged? Grab a plunger!
Being able to plunge away a bathtub or toilet problem with a plunger is one of the basic home improvement skills everybody should know. It might not always be the most pleasant task, but it's simple, easy to learn, and it often gets the job done. The better you understand how to fix a clogged drain with a plunger, the less you'll need to work. Here's how to most effectively fix your drain using a plunger.
First, what kind of plunger do you have? Most of us imagine the stereotypical bell-shaped plunger, but you might have seen other options at the local hardware store. Use the "stereotypical" one; this bell-shaped plunger should be able to fold back to become flatter when you need to unclog either a sink or a bathtub. There are less-traditional plungers that aren't able to change their size for the type of drain you'll be unclogging; try to avoid these.
Next, it's important to understand that plungers work better if they're encased in water. If your toilet is clogged and there's hardly any water in the bowl, fill a container with water and use it to fill up the toilet bowl about halfway up. Once you have enough water over the drain to essentially cover the end of the plunger, push the plunger over the drain and form a seal around it. Now, pump the plunger over the drain keeping the seal tight, usually using much of your force to push in the plunger. You should notice that the clog appears to be loosening; however, you might not be able to tell until you flush the toilet again.
You can probably try another round of plunging if this doesn't work. If your plunging still seems fruitless, you'll have to move to the next step on the plumbing ladder: using a snake to break up the clog. If you use a snake and continue to have trouble with a clogged drain that seems totally blocked, it will probably be time to call the plumber.
Most of your clogs, however, should break up once you use a plunger. At the very least, you'll be able to loosen up a clog enough to get your toilet working again. When it comes to other clogged drains - such as the bathroom sink or the bathtub drain - you can fold back the plunger and use a similar method of plunging, making sure that there's some water present above the drain.
Photo Credits: julia fredenburg
This post involves:
... and focuses on:
Posted by Fix Handyman on August 3, 2009 in
Bathroom, Bathtub, How to Fix, Plumber, toilet
Stumble
Reddit
Digg
Del.icio.us
