How To Fix » Handyman

How to Fix a Wet Basement

Fix Handyman — Mon, 06 Sep 2010 23:27:23 +0000

Water in the Basement?

One of the first things new homeowners realize about their home is that nothing happens automatically. That is to say, nothing will get cleaned unless you clean it up, and nothing will get maintained or repaired unless you take actions toward those ends. One of the frequent problem that pops up? A wet or exceedingly moist basement that smells stuffy. If you want a clean, dry basement that any guest would love to visit, here are a few tips.

First, if you don't have a dehumidifier, you'll need to get one. You'd be amazed at how much water a dehumidifier can remove from the air in your basement - you might find yourself emptying gallons and gallons of water that essentially came from "thin air." When you have a dehumidifier, you realize how things like air quality can really effect the rest of your home, not to mention the general mustiness of a moist basement. Make sure you have a dehumidifer up and running before you try some other solutions for a musty basement.

A dehumidifier can also solve other problems with a wet basement. For example, condensation appearing on your basement walls or on windows can mean that there's a lot of moisture in the air in your basement. A dehumidifier will also work to help solve this problem. If that's not enough, try using a vapor barrier. Remember that temperature differences also can make for humidity and condensation, so make sure that your basement walls are insulated.

For water seepage, there can be more problems with your basement that a simple dehumidifier can't fix. For example, rain water might be able to seap through the ground and enter your basement. If you have water seepage like this, you'll want to identify the source and then do further research to find out how you can remedy this kind of problem. If you're in doubt, try asking a professional for their advice.

Water damage can be among the most serious threats to your property, especially if you've got a basement full of sentimental items and useful trinkets and supplies. Make sure to guard your basement effectively by understanding insulation, air humidity, and how you can seal your basement off from potential water harm. The more you know about a wet basement, the better you'll be able to fix it.

Photo Credits: Loozrboy

Originally posted 2009-10-16 03:37:48.

How to Fix Your Furniture Spindle

Fix Handyman — Sun, 05 Sep 2010 23:14:09 +0000

Loose Spindles.

When your wood furniture is loose and your wooden dowel seems to move around too generously, you know that it's time to tighten up the loose ends and make sure that your furniture spindle won't suddenly go flying off in the right direction. Luckily, wooden chairs and tables that have been put together with dowels and spindles are actually very easy to repair: that is, if you know what you're doing. By the time you're done reading this article, you will.

The first thing you'll need to do - and this is the case in many around-the-home repairs - is actually to take your furniture apart. Don't worry; this is the point. If you don't take the spindle out of the dowel socket and retreat it, you wouldn't be able to fix much. Remove the spindle from the furniture socket and take a look at the edge. In all likelihood, the point of the spindle has seen its glue worn off, which explains why it has become loose. It's time to use a tool to remove the glue that remains. If you have a power drill, you should be able to use a grater-like tool in order to do this. Failing that, try some sandpaper.

Now that the wood is exposed, dry without the glue, and you will be able to re-treat the end of the spindle. Apply some basic glue to one side of the spindle, making sure to wrap silk thread around the entire area - don't try to puncture the glue. The thread will help expand the radius of the spindle, keeping it tight once the glue sets.

Once the spindle is ready, apply some more to the tip, and then on the inside of the socket. Slide the spindle into the socket, and then set the entire thing aside (with a clamp if you have one) so that it can dry - usually, you'll want to let wood set overnight. Once the glue is dry, take out the furniture and see how stable it seems. If it's still a little loose, you may need the glue to dry a bit longer. Another possibility is that there is another spindle that needs fixing.

Now that you've fixed your spindle, however, there's a good probability that the chair will feel good as new. Now if you ever come across another piece of furniture that has lost its sturdiness, you'll know just what to do with the spindle.

Photo Credits: jek in the box

Originally posted 2009-08-19 03:30:19.

How to Fix Shower Curtain Rings

Fix Handyman — Sat, 04 Sep 2010 23:00:56 +0000

Be innovative!

One of the parts of the shower ensemble that we take for granted is simple: the shower curtain rings! Our daily shower is such an ingrained part of our daily routine that we barely think about the quick second it takes to pull our shower curtain closed, let alone the rings that allow this simple maneuver possible. Of course, if you have broken shower curtain rings, suddenly you become inconveniently aware of their presence - or lack thereof. Here's how to fix your shower curtain rings for the long-term so you can get back to your daily routine.

First, go out to a home furnishing store and buy a new set of curtain rings. You'll be replacing all of the rings - remember that inside the home, uniformity in color and shape will be important when it comes to a "crowd" of parts like shower curtain rings. Your goal here will be to replace ever shower curtain ring, even the ones that are not broken. Once you've replaced them all, you'll feel better knowing you have a fresh set of curtain rings through every hole on your shower curtain.

In order to start fixing them, simply remove them. This might require taking the shower curtain off of the dowel first - don't try to pull it all down using force. After all, most household accidents take place inside the bathroom. Now that you've got the curtain off, pull off your shower curtain rings one by one. (Note: In some cases, you might have to take off the shower curtain rings one by one in order to get the curtain off. Whatever order works better, use it.)

Now you can start applying your shower curtain rings. One of the best ways to do this is to put the ring through the hole in the curtain so that you can attach the rings and curtain all at once when you're ready. Some shower curtain rings might be hard to figure out, but once you've figured out their mechanism - and some are quite simple - you'll be able to replace them all in no time.

Voila! You should now have a shower curtain attached firmly to the dowel in your shower, with a fresh set of rings keeping it attached. You should be able to enjoy this new setup for years. Until, of course, the next bathroom project shows up.

Photo Credits: Darwin Bell

Originally posted 2009-08-24 03:01:57.

How to Fix a Dry Lawn

Fix Handyman — Thu, 02 Sep 2010 22:45:49 +0000

Got a dry lawn?

Sure, you can read plenty of do-it-yourself articles that focus on home improvement and fixing different appliances and fixtures in your house, but what if your lawn is the thing that needs repair? If you've just gone through a dry month and need your lawn to go from brown to green in a hurry, this post is for you. We'll take a look at some tips and techniques for getting your lawn looking, well, alive again.

First, be sure what the source of the problem is. If you're not sure that it's the dry weather that's making your lawn brown, you'll want to figure out if it's a shortage of water or an abundance of hungry insects that's making your lawn go brown. If your lawn is brown in patches, there's a good chance that it's something other than the dryness - or at least not the dryness totally - that's effecting your lawn. If your entire front and backyard are both brown, you're probably looking at simple dryness. Hint: a good way to test this is to take out a clump of your lawn and look for the roots. If the roots are eaten up, you have bugs to blame. If not, the weather is probably the factor.
Next, you'll want to make sure you apply the appropriate amount of water to your lawn. Look up your individual grass type or at least climate and try to find out the typical amount of water your grass needs to look green. You don't want to under-water your grass, but you don't want to over-water it either. Note: making sure you water your grass the proper amount doesn't necessarily mean that you'll want to conserve water. It seemly means that you'll want to find the right amount of water for your grass type - it might be high or low.
Finally, you'll want to make sure you have strong blades of grass with strong roots. This is achieved by mowing your lawn with a high setting, meaning that you'll leave tall blades of grass. Why? The shorter the blades, the less need they have for strong roots to provide them with strength and nutrients. If you have longer blades of grass on a regular basis, the roots will grow strong and give your grass blades a healthy, attractive look. Remember that the more roots there are, the more water they'll need.

Photo Credits: Bill Hails

Originally posted 2009-09-28 03:38:26.

How to Fix a Sticky Drawer

Fix Handyman — Tue, 31 Aug 2010 22:22:37 +0000

Stuck? We'll help get it unstuck!

There might be nothing quite as frustrating as trying to open a drawer, only to force it out through a good ten seconds of struggle. If you're sick of trying to pry open a sticky drawer, or having it fly out at you once you've pried it loose, it's time to get in there and fix it for the long term. There's a good chance that the drawer in question is a wooden one, so let's figure out how to work with a wooden drawer.

Why don't metal and plastic drawers stick? Easy: they are made of moving parts meant to slide. If they do end up sticking, usually some metal lubricant or a Teflon lubricant for the plastic should be able to get things slide again.

When it comes to your wooden drawer, the task isn't so simple. Some wood drawers are made with sliding mechanisms, and others are simply put into place, assuming they will slide because they're made of wood. The first thing you'll need to do is get in there and try and figure out exactly what's causing the drawer to stick. This might be a problem unique to wood - for example, wood can swell and expand, causing it to be trickier to open up.

Check your drawer for anything that seems out of the ordinary - especially as compared to the other functioning drawers. If everything seems to be in place, you might simply need to use a lubricant. On wood, soap and beeswax will function fine as lubricants, but make sure to apply them generously and to as many areas as you can reach. If you miss one key area, it might leave the drawer still sticky even though you've applied a lubricant.

Other problems like loose nails can be causing the obstruction. If your drawer opens partially but suddenly stops, there's a good chance that something hard like a nail is getting in the way. Other hard obstructions in the sliding mechanism might be the cause, as well. If you can, try to remove the nearby drawers so that you'll have better access to the sticky drawer. This should give you the ability to have a closer look at the inner workings of your drawer, which is where you might be better able to make a diagnosis.

A sticky drawer can be caused by one obstruction, but the problem can also be a little more difficult to ascertain. Try to stick with it until you find the problem, and you should have a much better idea where to go from there.

Photo Credits: kcolwell

Originally posted 2009-08-27 03:46:32.

How to Fix a Garbage Disposal that Won’t Turn On and Won’t Make Noise

Fix Handyman — Mon, 30 Aug 2010 22:04:01 +0000

Fixing the Garbage Disposal

When you've lived long enough in a kitchen that has a garbage disposal, it's easy to get used to the idea that you can simply let the old grime and muck off of your dishes wash down your sink drain. It's only when the garbage disposal fails to work that we realize how much easier it made our lives around the home. So what do you do when your garbage disposal won't turn on?

In this article, we'll address this question in a specific case: what do you do if your garbage disposal won't turn on and won't make any noise?

First, a note of safety: it's crucial that you don't put your hand down the garbage disposal "hopper" - where the food goes. If your garbage disposal suddenly starts up, you'll find yourself wishing you hadn't put your hand down there, so be smart and don't do it at all! That's a basic rule of safety when working with a garbage disposal.

If your garbage disposal fails to turn on and won't make any noise, the first thing to do is to check the power itself. This may seem like an obvious solution, but it's the first place you'll want to look, as lack of power can mean other "fixes" don't do the job.

Next, if the power is fine, you'll want to check the re-set button on the bottom of the disposal (it's usually red and easy to find). Give the disposal a try after this.

If this still fails to get the disposal running, you'll actually want to check the circuit breaker. This is usually a good point to ask a professional or ask your landlord to help you out with your garbage disposal, as it may put you in unfamiliar electrical territory. It's best to leave it to the experts if you're not sure as to how to proceed.

Once someone is able to take a look at your garbage disposal, make sure you ask them about how they fixed it in case you need to know for future reference. If it helps, even make sure to write it down so that you can look back at your notes if your garbage disposal fails in the future. A good professional should be willing to give you advice.

jsgphoto

Originally posted 2009-09-25 03:32:24.

How to Fix your Drain

Fix Handyman — Sat, 28 Aug 2010 21:32:49 +0000

Shower Drain

As drains age, they begin leaking. Often, the piles loosen, the putty dries up or the tape begins to lose its effectiveness, causing water to trickle down the drain. If you have a sink drain that leaks, you can mend it by following the steps outlined here. And by attending to it yourself, you’ll be saving by not calling in a plumber!

First, close the tap before starting work. Next, remove all the fittings of the drain by unscrewing them, using a screwdriver. Next, take off the tailpiece. Ask a friend or family member to hold the drain pipe from over the sink while you loosen it with pliers.

If your drain has a plastic retainer, unscrew it before the drain pipe comes loose. Now that you have disassembled everything, clean it thoroughly. Check that you have cleaned the previous plumber’s putty from the fittings of the drain. If something is left over, it will weaken the bond when you put it back altogether and begin to leak once more.

Now, coat the part under the rim of the drain pipe with 0.5” thickness of plumbers’ putty to prevent future leakages. Remove any excess putty from the pipe or you will find it very difficult to clean it once it dries. Now, replace the drain pipe into the drain and screw all the fittings to the pipe below the sink. This simple operation will repair your leaky drain.

However, if you have a leaky shower drain, water may collect around the edges and make its way to the ceiling below it. To repair this, cut a panel in your ceiling downstairs. However, if you live in a rented accommodation, speak to your landlord and have him repair it or get his approval before doing it yourself.

Now, place some cloth on the floor just where you want to get down to work. Wear a pair of goggles. Then, make a cut of about 1.5 feet square into your ceiling that’s just below your shower drain, using a saw. Remove the locking unit using pliers and then the gasket.

Now, in the bathroom, loosen and take off the packing nut from the leaky drain. Remove the drain collar and clean the area around it with a putty knife, and clean the shower drain entirely.

Next, take about an inch of plumber’s putty and coat the base of the drain collar with it. Replace the drain collar using a very firm hand or some of the putty you just applied will come off. This is normal, so don’t panic. Once this is done, screw the locking nut tightly again and then take off any extra putty from around here and replace the packaging nut where it belongs. Use silicone caulk to keep this packing nut firmly in place.

To test if the leak is plugged, open the tap and let a little cold water trickle out. Now, if there is no leakage, you will need to repair the drywall. If a leak persists, call a plumber.

Photo Credits: lavenderstreak

Originally posted 2010-04-20 17:59:08.

How to Fix a Rotted Wooden Fence

Fix Handyman — Thu, 26 Aug 2010 21:07:25 +0000

Fix Your Fences.

Wood is a great material with a lot of uses around the home and in your landscaping, but it is not without its drawbacks. Old wood especially can be prone to rot, which can lead to difficult repairs if you haven't worked with rotted wood before. If you plan on repairing a rotted wood fence, you'll want to know exactly which tools you'll need and the proper way to approach your repairs. In this article, you'll find some great tips for repairing and replacing rotted parts of your wooden fence.

Most of the time, rotted wood occurs in either wood that is very old or that has been untreated: this usually means that wooden fences that have been up for a long time will be prone to rotting. This might include boundary fences or even small garden fences that are on your land. How do you know when wood is starting to rot? You'll usually see the rotting spots near the wood that is most exposed to moisture and given poor air circulation - such as closer to the ground and soil.

The first step is to identify the problem in your wooden fence - see how far the rotting has taken effect. You might even pull some of your fence out of the ground in order to get a better look - this is often not a bad idea because you'll be replacing much of the fence anyway.

Gather some standard fence-building tools: hammer and nails, measuring tape, a saw, wood planks, and a level. To start repairing the rotten wood, simply remove the sections of wood that have succumbed to rot. You might even find yourself removing more than that rotted wood because it is easier to replace an entire segment of wood rather than pieces of wood. If this is the case, make sure that you remove enough wood to make replacement easier on you.

Once you have an empty spot, you'll want to begin replacing the wood. This might involve using a 2 x 4 on the ground so that you can keep the replaced wood level. The 2 x 4 can act as your reference point for the replaced area of the fence.

Knowing exactly what to replace on your fence is the trick - you'll want to make it easier on yourself without giving yourself too much to actually replace. Try to consider how you can achieve the best-looking repaired fence with the least amount of stress.

Photo Credits: SMN

Originally posted 2009-07-30 08:00:33.

How to Fix an Uneven Chair

Fix Handyman — Wed, 25 Aug 2010 20:51:23 +0000

Lopsided chair?

There's nothing quite so frustrating as sitting down and trying to do work, only to realize that your chair seems to be on a swivel. This is usually the case for wooden chairs, which often are broken apart because of poor glue, worn-down legs, and other strange causes. If you want to know how to fix an uneven chair, it's time to bring out some basic tools: glue, sandpaper, and a wood clamp. Let's fix that uneven chair.

First, you'll have to see exactly what it is that needs fixing. Where in the structure of the chair does the problem seem to be coming from? Is the chair so old that the entire frame leans one way, or can you simply wear down the other legs to make it even? The way you fix the chair will depend on your problem, so take a few minutes to really diagnose what's going on. If you need to, push the chair around and see where the swivel is coming from. You should be able to spot it pretty quickly.

Now that you know what your problem is, you'll have to ask yourself how to make it even again. If the structure of the chair itself has the problem, then you might want to see if you can take it apart and put it back together again. This is how many around-the-house items are fixed, so don't worry if you think you'll never see the chair back in its original condition. If you're able to take apart the chair, you should have better insight into why exactly it seems to be on a swivel.

If the problem is with the leg height itself, you can use something to prop the chair up as an unattractive temporary fix. But if you plan on keeping the chair for the long haul, you'll want to get all of the legs even. You can wear down the bottom edges of each chair leg with sandpaper or even steel wool. Be sure to check the chair repeatedly to see how even you're getting it. You can also use a saw to cut the other legs down to size, so make sure you bring the chair outside or in your garage so you can collect and brush away any sawdust.

If your chair repair required the use of glue to re-set the chair's structure, you'll need to keep the chair drying overnight. If you have work to do and need that chair, see if there's a temporary solution you can set up before fixing the chair itself. But be careful - you don't want it falling apart on you!

Photo Credits: WayTru

Originally posted 2009-08-13 03:43:10.

How to Fix a Noisy Dishwasher

Fix Handyman — Mon, 23 Aug 2010 20:28:36 +0000

Noisy dishwasher? No problem, we can fix that!

When you have a noisy dishwasher, you don't exactly feel like doing the dishes. After all, doing the dishes alone isn't the most entertaining bit of home maintenance in the world. The prospect of adding noise to the equation when you're trying to watch the game on TV or hear your favorite television show makes the idea even less appealing. That's why you'll want to fix your noisy dishwasher as soon as you can - so you can get back to quiet evenings after a rough day at work.

Of course, in order to fix your noisy dishwasher, you'll have to know what's causing the noise in the first place. This is where most of the work in fixing the noise itself will take place. First, try to find your dishwasher's owner manual: if it gives any warnings against improper dish loading that you've been violating, the reason for the noisy dishwasher might simply be human error. Oops. Do the dishes right next time and hopefully the noise will subside.

It's not always human error, however. If the problem wasn't you, you'll have to do some dishwasher inspecting. The first place to look? The pump at the bottom of the dishwasher. Make sure that it's not clogged with debris such as stuck silverware, food, or uneaten seeds. This pump should be perfectly clean.

If that's not the problem, you also might want to make sure that your dishwasher is level. If your dishwasher sits on "feet," you should be able to adjust them manually. Use a level to check that it is not leaning forward/backward or to any one particular side.

If none of these fixes has made the noise go away, there's a possibility that your inlet valve is the source of the issues. The inlet valve is not an easy thing to replace, but you'll probably want it replaced if you want to get rid of the noise. If you're out of answers, call in a repairman who will know what makes your dishwasher become so noisy, and ask about the possibility of replacing the inlet valve. This could be the source of your noise, but it's not an easy challenge to take on yourself.

Make sure that you keep your dishwasher clean, regularly cleaning it out of debris and gunk. Even though the dishwasher seems like a self-cleaning machine, you'll want to check how clean it really is from time to time.

Photo Credits: scampion

Originally posted 2009-08-17 03:00:21.