First figure out what type of faucet you're working with.
One of the most common household repairs is the faucet-fix; it wouldn't be such a common repair if these devices worked all of the time! The bad news is you don't always feel like you have time to fix a faucet right away. That's why this article will help explain how to fix a faucet in a jiffy, even if you have a specific type of faucet that you aren't sure how to manage.
First, let's explore the faucet types.
The Ball Faucet: The ball faucet is your classic single-handle faucet on top of a large round base, allowing for a certain mix of hot and cold water with just one nozzle. Many homes today have ball faucets, but you might also want to be aware if your single-handle faucet is actually a disk faucet, a recent innovation.
The Disk Faucet: This faucet is also single-handled. The Disk faucet essentially works by operating with disks instead of a ball. These will also have a round base, so you won't always be able to discern a disk faucet from a ball faucet simply by looking at it. Be sure to find out what kind of faucet you're using before you try and fix it.
The Compression Faucet: Double-handled, the compression faucet works with two valves in each handle allowing for the basic blocking and allowing of flows.
The Cartridge Faucet: These can be a little tricky to discern as they can be single or double-handled. These operate using cartridges, and you might be able to recognize these by the motion they use: a double-handled cartridge faucet should require the faucet to be moved up and down for flow and twisting the knobs for temperature.
So how do you fix these individual faucets in a jiffy? You'll need to know the basics. The first rule with any of these faucets is to turn off the water supply leading to the faucet - either find a valve under the sink or turn off your house's water supply temporarily.
After you've turned off the water, turn the faucet on to let the rest of the remaining water flow out. To prevent dropping anything into the drain, try putting a towel over it. Begin to take apart the faucet and look for the problem - if you need to replace parts, bring that part with you to the hardware store so you can search for duplicates.
Find a guide or blueprint for how your faucet should look on the inside, and try to identify the problem. Online guides that show you how to fix each individual faucet can also help.
Photo Credits: Joe Shlabotnik
Originally posted 2009-09-10 03:41:27.
This post involves:
... and focuses on:
Posted by Fix Handyman on March 17, 2010 in
How to Fix, Plumber, Sink, faucet
Fixing the Garbage Disposal
When you've lived long enough in a kitchen that has a garbage disposal, it's easy to get used to the idea that you can simply let the old grime and muck off of your dishes wash down your sink drain. It's only when the garbage disposal fails to work that we realize how much easier it made our lives around the home. So what do you do when your garbage disposal won't turn on?
In this article, we'll address this question in a specific case: what do you do if your garbage disposal won't turn on and won't make any noise?
First, a note of safety: it's crucial that you don't put your hand down the garbage disposal "hopper" - where the food goes. If your garbage disposal suddenly starts up, you'll find yourself wishing you hadn't put your hand down there, so be smart and don't do it at all! That's a basic rule of safety when working with a garbage disposal.
If your garbage disposal fails to turn on and won't make any noise, the first thing to do is to check the power itself. This may seem like an obvious solution, but it's the first place you'll want to look, as lack of power can mean other "fixes" don't do the job.
Next, if the power is fine, you'll want to check the re-set button on the bottom of the disposal (it's usually red and easy to find). Give the disposal a try after this.
If this still fails to get the disposal running, you'll actually want to check the circuit breaker. This is usually a good point to ask a professional or ask your landlord to help you out with your garbage disposal, as it may put you in unfamiliar electrical territory. It's best to leave it to the experts if you're not sure as to how to proceed.
Once someone is able to take a look at your garbage disposal, make sure you ask them about how they fixed it in case you need to know for future reference. If it helps, even make sure to write it down so that you can look back at your notes if your garbage disposal fails in the future. A good professional should be willing to give you advice.
jsgphoto
This post involves:
... and focuses on:
Posted by Fix Handyman on September 25, 2009 in
Handyman, How to Fix, Sink, kitchen
Stumble
Reddit
Digg
Del.icio.us
