How to Fix a Faucet in a Flash

One of the most common household repairs is the faucet-fix; it wouldn't be such a common repair if these devices worked all of the time! The bad news is you don't always feel like you have time to fix a faucet right away. That's why this article will help explain how to fix a faucet in a jiffy, even if you have a specific type of faucet that you aren't sure how to manage.

First, let's explore the faucet types.

The Ball Faucet: The ball faucet is your classic single-handle faucet on top of a large round base, allowing for a certain mix of hot and cold water with just one nozzle. Many homes today have ball faucets, but you might also want to be aware if your single-handle faucet is actually a disk faucet, a recent innovation.

The Disk Faucet: This faucet is also single-handled. The Disk faucet essentially works by operating with disks instead of a ball. These will also have a round base, so you won't always be able to discern a disk faucet from a ball faucet simply by looking at it. Be sure to find out what kind of faucet you're using before you try and fix it.

The Compression Faucet: Double-handled, the compression faucet works with two valves in each handle allowing for the basic blocking and allowing of flows.

The Cartridge Faucet: These can be a little tricky to discern as they can be single or double-handled. These operate using cartridges, and you might be able to recognize these by the motion they use: a double-handled cartridge faucet should require the faucet to be moved up and down for flow and twisting the knobs for temperature.

So how do you fix these individual faucets in a jiffy? You'll need to know the basics. The first rule with any of these faucets is to turn off the water supply leading to the faucet - either find a valve under the sink or turn off your house's water supply temporarily.

After you've turned off the water, turn the faucet on to let the rest of the remaining water flow out. To prevent dropping anything into the drain, try putting a towel over it. Begin to take apart the faucet and look for the problem - if you need to replace parts, bring that part with you to the hardware store so you can search for duplicates.

Find a guide or blueprint for how your faucet should look on the inside, and try to identify the problem. Online guides that show you how to fix each individual faucet can also help.

Photo Credits: Joe Shlabotnik

This post involves:

ball, cartridge, compression, disk, faucet, water

... and focuses on:

How to Fix, Plumber, Sink, faucet

Posted by Fix Handyman on September 10, 2009 in How to Fix, Plumber, Sink, faucet. You can skip to the end and leave a response. Pinging is currently not allowed.