Sinking deck to fix deck.
Your backyard deck might be the pride and joy of all the landscaping and additions you've made to your house; you get to bring guests to it, raise a family on it, and enjoy quiet summer evenings in comfort. That's why it can be so disconcerting to see a problem like a sinking deck post - all of that work and money sometimes still can't prevent the Earth from throwing a wrench in the engine. That's why you'll want to fix your sinking deck post as soon as possible.
First, you'll need the right equipment: a jack, pea gravel, and a pipe. Of course, without the instructions, these might sound like odd equipment for a job like this, but bear with me.
Make a diagnosis. Using a balance to measure the actual problem with your deck, you want to make sure that your sinking deck post is the only one sinking. After all, if you have two posts sinking, you should use this opportunity to treat the problem as a whole - while you have the equipment out.
Once you know which deck post - or posts - to fix, try to take a look at the kind of access you can get. Some people have decks with plenty of room underneath, and if this is the case with your deck, you shouldn't have ot move too many object around in order to get at the sinking deck post. But if you have a smaller deck without a whole lot of room, you'll probably need to remove some floor boards in order to get at the right post. This might also require that you set aside some time to remove furniture, hopefully at a time when no one will be needing the deck at all.
With the access to this sinking deck post secured, raise the deck (and the post) up with the jack to the point at which the deck is level again. Then, using the pipe you have ready, slide it into the hole where the sinking deck post had just been. Pour the pea gravel into this hole through the pipe and try to make sure that you pack as much gravel into the hole as you can, keeping an eye on how balanced your deck is overall.
This should add some stability to your deck and hopefully prevent further sinking. Remember to be careful with each step so as to do the best overall job possible. If you removed floor boards, you can replace them now, and move the furniture back onto the deck.
Photo Credits: MrPhilDog
Originally posted 2009-09-02 03:42:10.
This post involves:
... and focuses on:
Posted by Fix Handyman on December 29, 2011 in
Backyard, Deck, Floors, Handyman, How to Fix
Save money fix it yourself.
For anyone who's ever seen a dish washer or washing machine break down, the struggle of man vs. technology can seem like a mighty one. This is particularly true if you don't have a lot of experience in working with appliances or other around-the-home machinery. In those cases, you're often at the mercy of the contractor's schedule. If waiting for a repairman to "get around to it" isn't in the cards for you, you'll want to fix your own appliances. There's good news: doing so will help you save money. But you need to figure it out first.
First, make sure you keep all of your owner's manuals in one safe place, usually in a storage box somewhere in your basement or attic. If you don't have an owner's manual for the appliance that broke down, you can still try to find one online, or see if there's a phone number printed on the side of an appliance that might be able to help. The owner's manual is there for a reason: the problem isn't that it doesn't help, but that many people forget to use it.
You can also conduct an online search to do your own research into the appliance. There are some Web sites out there that will be able to show a diagram of the appliance you're working with, and even tell you where you might find some replacement parts.
Fixing a machine usually requires two steps: diagnosis and repair/replacement. The hard part is diagnosis: if you don't understand the inner workings of a machine, you probably won't be able to figure out why your washing machine won't drain or why your dish washer has gone haywire. That's why owner's manuals can come in handy, offering blueprint-like guides to the inner workings of each appliance.
Once you've diagnosed a problem, you have to see if it's fixable or not. If you can snap something back into alignment or flip a switch that shouldn't have been unflipped, repairs will be relatively easy. But if parts have worn down beyond repair, you'll have to order a new replacement part. Don't fret; this is something that the repairman would have had to have done anyway. Figure out the name of the part and call some hardware stores in your area to figure out if you've found the right one. Then you can simply pick it up, along with anything else you might need to purchase.
Photo Credits: ztephen
Originally posted 2009-08-24 03:42:06.
This post involves:
... and focuses on:
Posted by Fix Handyman on October 9, 2011 in
appliances, Handyman, How to Fix
Stumble
Reddit
Digg
Del.icio.us
