How to Fix Annoying Drywall Nails |
Comment First |

Box of Drywall Nails
First, consult this article on "How Stuff Works" in order to check out the equipment you might be needing. A nail set will come in handy, as well as some basic tools like a hammer and sandpaper.
Next, you'll want to drive the popped nails back to where they were. If one is sticking out too far, simply remove it so that you can drive it back in again. You can use your nail set at this point. Remember that you're using your nail set, so the nail might go deeper than you originally thought it would be.
One of the reasons this nail might have popped out in the first place is that the change in the wood put pressure on it, squeezing it out of place. You can relieve some of this pressure by driving in a new nail about two inches above the old one onto the same stud in the drywall.
At this point, your drywall won't look very good - in fact, you will probably have two holes with nails in them. That's why it's important to be ready to cover up the drywall again. Clean out the area and then fill in the holes with a spackling compound. You can use your putty knife for this. Make sure the area is even with the rest of the drywall. After this spackle has dried, sand down the area and then apply primer and paint to match the rest of the drywall. Make sure that you touch up this area as needed, but allow it time to dry.
After these repairs, your drywall should look good as new, and hopefully with the repairs you've made, you won't have to worry about that drywall nail popping out again for a while. Doing these quick repairs should help you better understand how drywall works, as well.
Photo Credits: Bistrosavage
This post involves:

Stumble
Reddit
Digg
Del.icio.us