Shine Your Pine.
Furniture is often made from pine wood, which is a soft wood that can deteriorate over time. Even if the pine furniture you own was once shiny and new, it might not take very long for it to lose that luster. If you want that fresh pine look back, however, it may be as simple as following a few steps. Here's how you can fix the pine that won't shine in
your house.
As is often the first step when attempting a repair, you're going to want to clean your pine out first. It may seem unnecessary, but dust and debris can often get in the way of cosmetic home repairs. After all, you won't want to paint over a pebble, would you? That's why you'll want to make sure that your pine is clean and hopefully clear of debris before you get started.
The key to restoring the "shine" to pine is in the solution you'll be applying next. This will probably require a trip to the store, so make sure you have your list ahead of time:
- Soft soap (1/4 cup)
- Mineral oil (1 cup)
- Pine oil (1 tablespoon)
You're also going to want to make sure you have a cup of warm water handy. To mix up this solution, start with the mineral oil and pine oil first. Once they're mixed together, stir in the soft soap and the water. (By the way, if you're curious about what soft soap means, a liquid soap will do just fine).
Now that you have your solution ready, put some of it onto a cloth - you don't want to use it all up right away. Generously apply the mixture via the cloth onto the pine wood, but make sure that none of it drips or coalesces, as this is too much. In fact, once you're done, you can take a dry cloth and pick up extra solution that you applied.
It will be important to make sure that your solution doesn't only touch the surface of the wood, but seeps in as much as it can. You can't control this; you can only make sure to apply an even amount of the mixture onto your pine wood. Let it dry out and take a look at the pine later so that you can evaluate how well the solution worked.
It might be possible to fine pine solutions pre-made for you at a hardware store or other outlet. Before you go shopping, try to call around and see if a store has some stocked so that you can pick one up.
Photo Credits: Nature form furniture
This post involves:
... and focuses on:
Posted by Fix Handyman on August 31, 2009 in
Furniture, Handyman, How to Fix
Loose Spindles.
When your wood furniture is loose and your wooden dowel seems to move around too generously, you know that it's time to tighten up the loose ends and make sure that your furniture spindle won't suddenly go flying off in the right direction. Luckily, wooden chairs and tables that have been put together with dowels and spindles are actually very easy to repair: that is, if you know what you're doing. By the time you're done reading this article, you will.
The first thing you'll need to do - and this is the case in many around-the-home repairs - is actually to take your furniture apart. Don't worry; this is the point. If you don't take the spindle out of the dowel socket and retreat it, you wouldn't be able to fix much. Remove the spindle from the furniture socket and take a look at the edge. In all likelihood, the point of the spindle has seen its glue worn off, which explains why it has become loose. It's time to use a tool to remove the glue that remains. If you have a power drill, you should be able to use a grater-like tool in order to do this. Failing that, try some sandpaper.
Now that the wood is exposed, dry without the glue, and you will be able to re-treat the end of the spindle. Apply some basic glue to one side of the spindle, making sure to wrap silk thread around the entire area - don't try to puncture the glue. The thread will help expand the radius of the spindle, keeping it tight once the glue sets.
Once the spindle is ready, apply some more to the tip, and then on the inside of the socket. Slide the spindle into the socket, and then set the entire thing aside (with a clamp if you have one) so that it can dry - usually, you'll want to let wood set overnight. Once the glue is dry, take out the furniture and see how stable it seems. If it's still a little loose, you may need the glue to dry a bit longer. Another possibility is that there is another spindle that needs fixing.
Now that you've fixed your spindle, however, there's a good probability that the chair will feel good as new. Now if you ever come across another piece of furniture that has lost its sturdiness, you'll know just what to do with the spindle.
Photo Credits: jek in the box
This post involves:
... and focuses on:
Posted by Fix Handyman on August 19, 2009 in
Furniture, Handyman, How to Fix
Stumble
Reddit
Digg
Del.icio.us
