How To Fix » metal drywall

How to Fix a Small Drywall Hole

Comment First

Measure the hole before starting repair.

When you own your own home, seeing a hole in your drywall can be really frustrating. You've went through all the work to attain a mortgage loan, work forty hours a week to make the payments, and still everything seems to take time and money! But what if you had another option that didn't take nearly as much of your time and money? That solution is known as skillful home improvement. Even if you've never fancied yourself a do-it-yourselfer, with this article, you may just find yourself inspired.

First, repairing a small hole in your drywall will mean finding some necessary tools. In addition to primer and properly-colored paint, you'll want to find a wallboard taping knife at least half a foot wide, a drywall sanding block, wallboard joint compound, and a metal drywall patch with adhesive mesh. Note: you're going to want to measure the drywall hole size before buying the metal drywall patch.

Measure the hole in your drywall - since we describe it as a "small" hole, there's a good chance it's somewhere up to 8 inches. Once you've got it measured, go to your hardware store and buy the drywall patch mentioned in the preceding paragraph. Once you have this patch, you can simply peel it and apply it to the part of the wall with the hole in it.

Take your wallboard taping knife and apply the wallboard joint compound to the patch, being sure to fill all of the holes in the area. Give it a good two or three coats to make sure the entire area is well-covered and relatively smooth (if it's not perfect, don't worry; you'll be sanding it down once it dries).

After waiting for it to dry, take your sanding block and sand off the area so that it's smooth and consistent with the rest of the drywall. Don't worry about making mistakes, because you can simply fill those in and begin the process of filling in and sanding over again. It's frustrating, sure, but that doesn't mean you can't get past it.

With the area properly sanded and dried, you should be ready to apply the primer. Now you can put the primer on the area and wait for it to dry. Once it's dried, roll the paint on (much like how you would apply the paint on the rest of the wall) and voila! You have a fixed drywall hole.

Photo Credits: soxophone player

Originally posted 2009-09-30 03:55:55.

This post involves: