Crusty Ice Maker
An ice maker can be a great convenience around the homes, but they're not a necessity. For that reason, when an ice maker breaks down, it's tempting to put off its repair for a while, simply choosing to live without the convenience of ice-on-command. But what if you did know how to fix some common ice maker problems, or at least knew what the problems might be caused by? You might be a little more inspired to get the thing up and running again - hopefully in a flash.
If your ice maker is making too much ice, you're probably looking at a problem with the shutoff arm - test the shutoff switch to make sure that it's working properly.
If there's ice but it won't come out, you might be looking at an ejector gear problem. ice makers have "ejector gear" in them that helps the ice come out when you place a cup underneath it to capture the ice. In this gear, you'll find an ejector motor - be sure to check that and be sure that it's working. Other problems can include the thermostat and the ice mold heater.
If your ice maker is making no ice, there are a lot of problems you might be having. You'll want to check the shutoff gear, including the shutoff arm and checking the shutoff switch. You'll also want to check the water supply line so that you're sure that water is actually pumping into the ice maker. The temperature is something that contributes, of course, to having ice or not having ice, so be sure that the temperature in the ice maker is correct. You can check the thermostat as well. Be sure to check the water inlet valve as well. You can find an excellent resource for fixing these problems here.
If your ice tastes bad, be sure to check the basic supply lines like the water inlet valve. You'll also want to wash out the ice maker as well as the surrounding area. If you're still having problems, check the places in your refrigerator that your ice water might travel through. If only your ice cubes taste bad - and not your regular water supply - there is probably something along those water lines.
If water is leaking, check the water inlet switch and water inlet valve, as well as the refrigerator's level - consult this guide for a little more information on that. You'll also want to make sure the supply line is running adequately as well as the fill cup alignment (click here).
Photo Credits: Wyscan
This post involves:
... and focuses on:
Posted by Fix Handyman on December 22, 2009 in
Handyman, How to Fix, appliances, kitchen
Replace that broken fridge handle quickly and easily.
Around the house, the refrigerator is probably one of the appliances we take most for granted. It keeps our food fresh for days, keeps liquids cool, and the freezer can store foods for months. If you have a broken refrigerator handle, you've already experienced what it's like when this appliance doesn't work like it usually does. You probably have one thought: "I need to get this fixed immediately!" Though the handle breaking can be a minor inconvenience, it's something you'll want to taken care of. Here's how to fix it yourself.
Fortunately, repairing a refrigerator handle is an easy thing. Why's that? Because the simplest way to do it is simply to replace the door handle itself. And in order to accomplish this, you'll follow a few, simple steps.
First, you'll want to get rid of the old door handle. Presumably, you've left this handle on. Identify the areas on the handle that are attached to the refrigerator via screws, and then loosen the screws. Make sure to keep those screws in case you need to use them with your new refrigerator handle. Even if you buy the exact model of refrigerator handle from the manufacturer, there's no guarantee that they'll include the right screws you need. Rather than go through the trouble of finding new ones, simply save the old ones! (This is unless, of course, the screws were the problem in the first place).
Next, it's time to install the new handle. Line it up with the matching holes and twist in the top screw - this will allow the refrigerator handle to hang. Don't necessarily tighten this screw right away, as you'll want some flexibility for later. Next, twist in the bottom screw to near tightness with some flexibility. Now, use the flexibility of the new handle's position to align it correctly with the refrigerator. Tighten the top screw and then the bottom one. Voila!
Often times, repairs like this can be as simple as going online and ordering the right parts. Some manufacturers will even replace broken parts for free - some will do this while requiring that you send them the old part. In either case, make sure to explore your options and take care of this right away: don't let your house deteriorate. You never know when a guest might show up unexpectedly and try to open your refrigerator.
Photo Credits: Avoir Chaud
This post involves:
... and focuses on:
Posted by Fix Handyman on August 10, 2009 in
Handyman, How to Fix, appliances, kitchen
Stumble
Reddit
Digg
Del.icio.us
